Remove Connector

Remove Connector

Overview

This section outlines the comprehensive process for removing existing connectors from the project that are not connected to any network. It includes step-by-step instructions on identifying the connectors you wish to remove.

Start Deletion Mode

  1. Go to the Interaction View.
  2. Add the entity to the network diagram, then click on the Connector you want to remove.
  3. Click on the Remove From Network button in the diagram.

  1. A confirmation pop-up will appear. 
  2. Click the Yes button to remove the connector from the project. Click the No button to cancel the removal of the connector.
  3. The entity is removed from the network, and after successful removal, a message appears on the screen.



    • Related Articles

    • Edit Connector

      Overview This article provides you with information on how to edit the system that is part of the project network. Please note that the system can be edited from both the Interaction and Dataflow views. When you are on the Interaction View and click ...

    • Connect Connector

      Overview This section lets you connect a connector to another entity. A single wizard guides you through the process of connecting the desired connector to any entity. The same wizard also enables you to connect automation to any entity. In the ...

    • Remove Laptop User

      This article offers detailed guidance on removing a user from laptop mode, including step-by-step instructions and tips for ensuring a smooth transition. To effectively remove a laptop user from the system, please follow these detailed steps: Begin ...

    • Connector Settings

      Overview This article provides a comprehensive guide on how to update the connector settings of your system effectively. You will learn how to configure connector settings to ensure seamless integration with other systems. Please note that if you are ...

    • Add Connector to Project

      Overview This section lets you add connectors to your project. A single wizard guides you through adding the desired connector. The same wizard also enables you to add automation. In the second step of the wizard, you need to select the entity type. ...